Inclusion of appropriate config files. More...
#include "mac.h"Go to the source code of this file.
Defines | |
| #define | NX_FULLY_HOSTED 0 |
| Build for fully hosted partitioning. | |
| #define | NX_UMAC_PRESENT 1 |
| Whether UMAC is enable or not. | |
MAC HW version | |
| #define | NX_MAC_HE (NX_MAC_VER >= 20) |
| MAC version. | |
| #define | NX_RX_RING (NX_MAC_VER >= 21) |
| Flag indicating if the FW is compiled for a MAC HW implementing a RX ring buffer. | |
General Configuration | |
| #define | NX_VIRT_DEV_MAX CFG_VIF_MAX |
| Max number of virtual interfaces managed. | |
| #define | NX_REMOTE_STA_MAX CFG_STA_MAX |
| Max number of peer devices managed. | |
| #define | NX_HEAP_SIZE (2048 + 2048 * NX_UMAC_PRESENT + 256 * NX_VIRT_DEV_MAX + 64 * NX_REMOTE_STA_MAX) |
| Heap size. | |
| #define | NX_EMB 1 |
| Code compiled for EMB platform. | |
Beacon Configuration | |
| #define | NX_BEACONING 1 |
| Beaconing support. | |
| #define | NX_BCN_AUTONOMOUS_TX 1 |
| Autonomous beacon transmission support. | |
| #define | NX_BCNFRAME_LEN 512 |
| Maximum size of a beacon frame. | |
Power Save Configuration | |
| #define | NX_UAPSD 1 |
| UAPSD support. | |
| #define | NX_DPSM 1 |
| DPSM support. | |
| #define | NX_POWERSAVE 1 |
| Legacy power save support. | |
HE Configuration | |
| #define | NX_HE 0 |
| HE Support. | |
VHT Configuration | |
| #define | NX_VHT 0 |
| VHT Support. | |
A-MSDU Configuration | |
| #define | NX_AMSDU_TX 1 |
| Define the A-MSDU option for TX. | |
| #define | NX_TX_PAYLOAD_MAX 6 |
| Number of payloads per TX descriptor. | |
A-MPDU Configuration | |
| #define | NX_AMPDU_TX 1 |
| A-MPDU TX support. | |
| #define | NX_MAX_BA_TX CFG_BATX |
| Maximum number of TX Block Ack. | |
| #define | NX_REORD CFG_BARX |
| RX Packet Reordering support. | |
| #define | NX_REORD_BUF_SIZE CFG_REORD_BUF |
| RX Packet Reordering Buffer Size. | |
| #define | NX_AMSDU_DEAGG 0 |
| A-MSDU de-aggregation support. | |
BeamForming Configuration | |
| #define | RW_BFMEE_EN 0 |
| Beamformee support. | |
| #define | RW_BFMER_EN 0 |
| Beamformee support. | |
| #define | RW_BFR_TXFRAME_CNT 0 |
| Beamformee support. | |
| #define | RW_USER_MAX CFG_MU_CNT |
| Number of users supported. | |
| #define | RW_MUMIMO_TX_EN (RW_USER_MAX > 1) |
| MU-MIMO TX support. | |
| #define | RW_MUMIMO_SEC_USER1_EN (RW_USER_MAX > 1) |
| Support for up to one secondary user. | |
| #define | RW_MUMIMO_SEC_USER2_EN (RW_USER_MAX > 2) |
| Support for up to two secondary users. | |
| #define | RW_MUMIMO_SEC_USER3_EN (RW_USER_MAX > 3) |
| Support for up to three secondary users. | |
| #define | RW_MUMIMO_RX_EN 0 |
| MU-MIMO RX support. | |
P2P Configuration | |
| #define | NX_P2P 1 |
| P2P support. | |
| #define | NX_P2P_VIF_MAX CFG_P2P |
| Maximum number of simultaneous P2P connections. | |
| #define | NX_P2P_GO 1 |
| P2P GO Support. | |
MESH Configuration | |
| #define | RW_MESH_EN (1) |
| Wireless Mesh Networking support. | |
| #define | RW_UMESH_EN (NX_UMAC_PRESENT) |
| UMAC support for MESH. | |
| #define | RW_MESH_VIF_NB (CFG_MESH_VIF) |
| Maximum Number of. | |
| #define | RW_MESH_LINK_NB (CFG_MESH_LINK) |
| Maximum number of MESH link. | |
| #define | RW_MESH_PATH_NB (CFG_MESH_PATH) |
| Maximum number of MESH path. | |
| #define | RW_MESH_PROXY_NB (CFG_MESH_PROXY) |
| Maximum number of MESH proxy. | |
TX Configuration | |
| #define | NX_TX_MPDU_SPACING CFG_SPC |
| Minimal MPDU spacing we support in TX. | |
| #define | NX_TXQ_CNT (AC_MAX + NX_BEACONING) |
| Number of TX queues in the LMAC. | |
| #define | NX_TXDESC_CNT0 CFG_TXDESC0 |
| Number of TX descriptors available in the system (BK). | |
| #define | NX_TXDESC_CNT1 CFG_TXDESC1 |
| Number of TX descriptors available in the system (BE). | |
| #define | NX_TXDESC_CNT2 CFG_TXDESC2 |
| Number of TX descriptors available in the system (VI). | |
| #define | NX_TXDESC_CNT3 CFG_TXDESC3 |
| Number of TX descriptors available in the system (VO). | |
| #define | NX_TXDESC_CNT4 CFG_TXDESC4 |
| Number of TX descriptors available in the system (BCN). | |
| #define | NX_TXFRAME_CNT (NX_VIRT_DEV_MAX + RW_BFR_TXFRAME_CNT) |
| Number of TX frame descriptors and buffers available for frames generated internally. | |
| #define | NX_TXFRAME_CNT 2 |
| Number of TX frame descriptors and buffers available for frames generated internally. | |
| #define | NX_TXFRAME_LEN 384 |
| Maximum size of a TX frame generated internally. | |
| #define | NX_DEFAULT_TX_CREDIT_CNT 4 |
| Number of TX flow control credits allocated by default per RA/TID (UMAC only). | |
RX Configuration | |
| #define | NX_RX_PAYLOAD_LEN 512 |
| RX Payload buffer size. | |
| #define | NX_RX_LONG_MPDU_CNT 2 |
| Maximum number of the longest A-MSDUs that can be stored at the same time. | |
| #define | NX_RX_PAYLOAD_DESC_CNT ((RWNX_MAX_AMSDU_RX / NX_RX_PAYLOAD_LEN) * NX_RX_LONG_MPDU_CNT + 1) |
| Number of RX payload descriptors - defined to be n times the maximum A-MSDU size plus one extra one used for HW flow control. | |
| #define | NX_RXDESC_CNT NX_RX_PAYLOAD_DESC_CNT |
| Number of RX descriptors (SW and Header descriptors). | |
| #define | NX_DMADESC_PER_RX_PDB_CNT 1 |
| Number of platform DMA descriptors in each RX payload descriptor. | |
Radar Configuration | |
| #define | NX_RADAR_DETECT 1 |
| Radar enable software define. | |
| #define | RW_RADAR_EN 1 |
| Radar enable hardware define (i.e. used in registers file). | |
Unsupported HT Frame Logging Configuration | |
| #define | NX_UF_EN 0 |
Monitor + Data interface Support | |
| #define | NX_MON_DATA 0 |
Debug Configuration | |
| #define | NX_DEBUG_DUMP 0 |
| Debug dump forwarding. | |
| #define | NX_DEBUG_DUMP_KEY 0 |
| Debug key RAM forwarding. | |
| #define | NX_DEBUG CFG_DBG |
| Debug support. | |
| #define | NX_PRINT NX_PRINT_NONE |
| Debug print output. | |
| #define | NX_TRACE 1 |
| Trace Buffer Support. | |
| #define | NX_PROFILING_ON 1 |
| Profiling support. | |
| #define | NX_SYS_STAT 0 |
| System statistics support. | |
Extra Configuration | |
| #define | NX_RECOVERY 0 |
| Recovery support. | |
| #define | NX_CONNECTION_MONITOR 1 |
| Connection monitoring support. | |
| #define | NX_MULTI_ROLE 1 |
| Multi-role support (AP+STA, STA+STA). | |
| #define | NX_HW_SCAN 1 |
| HW scan support. | |
| #define | NX_MFP 1 |
| MFP support (for UMAC only). | |
| #define | RW_WAPI_EN 1 |
| WAPI support. | |
| #define | RW_WLAN_COEX_EN 0 |
| WLAN coexistence support. | |
| #define | NX_KEY_RAM_CONFIG 0 |
| Compilation for a HW supporting Key RAM configuration. | |
| #define | NX_TDLS 1 |
| TDLS support. | |
| #define | NX_BW_LEN_ADAPT 1 |
| per-BW length adaptation support | |
| #define | NX_BW_LEN_STEPS 4 |
| Number of steps for BW length adaptation. | |
| #define | NX_HSU (CFG_HSU) |
| HSU support. | |
| #define | RW_HSU_SHA_EN 1 |
| Recovery support. | |
| #define | NX_ANT_DIV 1 |
| Antenna Diversity support. | |
| #define | NX_TG 0 |
| Traffic generator support. | |
| #define | NX_FHOST_MONITOR 0 |
| Monitor mode support. | |
| #define | NX_SMARTCONFIG 0 |
| Smartconfig support. | |
| #define | NX_CRYPTOLIB 0 |
| External crypto lib compiled. | |
Fw Features Configuration | |
| #define | NX_CHNL_CTXT (NX_HW_SCAN || NX_P2P) |
| Channel Contexts support. | |
| #define | NX_CHAN_CTXT_CNT 3 |
| Maximum number of operating channel contexts. | |
| #define | NX_GP_DMA (NX_CHNL_CTXT || NX_BCN_AUTONOMOUS_TX || NX_RADAR_DETECT || RW_BFMER_EN) |
| General Purpose DMA module. | |
| #define | NX_RX_FRAME_HANDLING (NX_POWERSAVE || NX_CONNECTION_MONITOR || NX_UMAC_PRESENT || RW_BFMER_EN) |
| Internal handling of received frame. | |
| #define | NX_TX_FRAME (NX_POWERSAVE || NX_CONNECTION_MONITOR || NX_CHNL_CTXT || NX_BCN_AUTONOMOUS_TX || RW_BFMER_EN) |
| Internal frame generation support. | |
| #define | NX_TD_STA (RW_BFMER_EN || NX_TDLS || NX_MAC_HE) |
| Traffic Detection per STA support. | |
| #define | NX_TD (NX_DPSM || NX_CHNL_CTXT || NX_P2P_GO || NX_TD_STA) |
| Traffic Detection support. | |
| #define | NX_MM_TIMER (NX_MULTI_ROLE || NX_CHNL_CTXT || NX_DPSM || NX_P2P || NX_UAPSD || RW_BFMER_EN | NX_BEACONING) |
| MAC Management timer support. | |
Misc | |
| #define | NX_11AX_DRAFT_2_0 0 |
| Implement IEEE802.11ax-D2.0 (instead of D3.2). | |
| #define | RW_NX_LDPC_DEC 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
| #define | RW_NX_AGC_SNR_EN 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
| #define | RW_NX_IQ_COMP_EN 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
| #define | RW_NX_FIQ_COMP_EN 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
| #define | RW_NX_DERIV_80211B 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
| #define | RW_KEY_EXTENDED 1 |
| This macro appears in some generated header files, define it to avoid warning. | |
Inclusion of appropriate config files.
This file should be included each time an NX_xxx definition is needed. CFG_xxx macros must no be used in the code, only NX_xxx, defined in the included config files.
Copyright (C) RivieraWaves 2011-2019
Definition in file rwnx_config.h.
1.6.1