machw_mib_tag Struct Reference
[MACHW_MIB]

Simulated MIB structure. More...

#include <hal_machw_mib.h>

Data Fields

uint32_t dot11_wep_excluded_count
 MIB element to count the number of unencrypted frames that have been discarded.
uint32_t dot11_fcs_error_count
 MIB element to count the receive FCS errors.
uint32_t nx_rx_phy_error_count
 MIB element to count the number of PHY Errors reported during a receive transaction.
uint32_t nx_rd_fifo_overflow_count
 MIB element to count the number of times the receive FIFO has overflowed.
uint32_t nx_tx_underun_count
 MIB element to count the number of times underrun has occured on the transmit side.
uint32_t reserved_1 [7]
 Reserved.
uint32_t nx_qos_utransmitted_mpdu_count [8]
 MIB element to count unicast transmitted MPDU.
uint32_t nx_qos_gtransmitted_mpdu_count [8]
 MIB element to count group addressed transmitted MPDU.
uint32_t dot11_qos_failed_count [8]
 MIB element to count the number of MSDUs or MMPDUs discarded because of retry-limit reached.
uint32_t dot11_qos_retry_count [8]
 MIB element to count number of unfragmented MSDU's or MMPDU's transmitted successfully after 1 or more transmission.
uint32_t dot11_qos_rts_success_count [8]
 MIB element to count number of successful RTS Frame transmission.
uint32_t dot11_qos_rts_failure_count [8]
 MIB element to count number of unsuccessful RTS Frame transmission.
uint32_t nx_qos_ack_failure_count [8]
 MIB element to count number of MPDU's not received ACK.
uint32_t nx_qos_ureceived_mpdu_count [8]
 MIB element to count number of unicast MPDU's received successfully.
uint32_t nx_qos_greceived_mpdu_count [8]
 MIB element to count number of group addressed MPDU's received successfully.
uint32_t nx_qos_ureceived_other_mpdu [8]
 MIB element to count the number of unicast MPDUs not destined to this device received successfully.
uint32_t dot11_qos_retries_received_count [8]
 MIB element to count the number of MPDUs received with retry bit set.
uint32_t nx_utransmitted_amsdu_count [8]
 MIB element to count the number of unicast A-MSDUs that were transmitted successfully.
uint32_t nx_gtransmitted_amsdu_count [8]
 MIB element to count the number of group-addressed A-MSDUs that were transmitted successfully.
uint32_t dot11_failed_amsdu_count [8]
 MIB element to count number of AMSDU's discarded because of retry limit reached.
uint32_t dot11_retry_amsdu_count [8]
 MIB element to count number of A-MSDU's transmitted successfully with retry.
uint32_t dot11_transmitted_octets_in_amsdu [8]
 MIB element to count number of bytes of an A-MSDU that was transmitted successfully.
uint32_t dot11_amsdu_ack_failure_count [8]
 MIB element to counts the number of A-MSDUs that did not receive an ACK frame successfully in response.
uint32_t nx_ureceived_amsdu_count [8]
 MIB element to count number of unicast A-MSDUs received successfully.
uint32_t nx_greceived_amsdu_count [8]
 MIB element to count number of group addressed A-MSDUs received successfully.
uint32_t nx_ureceived_other_amsdu [8]
 MIB element to count number of unicast A-MSDUs not destined to this device received successfully.
uint32_t dot11_received_octets_in_amsdu_count [8]
 MIB element to count number of bytes in an A-MSDU is received.
uint32_t reserved_2 [24]
 Reserved.
uint32_t dot11_transmitted_ampdu_count
 MIB element to count number of A-MPDUs transmitted successfully.
uint32_t dot11_transmitted_mpdus_in_ampdu_count
 MIB element to count number of MPDUs transmitted in an A-MPDU.
uint32_t dot11_transmitted_octets_in_ampdu_count
 MIB element to count the number of bytes in a transmitted A-MPDU.
uint32_t wnlu_ampdu_received_count
 MIB element to count number of unicast A-MPDU's received.
uint32_t nx_gampdu_received_count
 MIB element to count number of group addressed A-MPDU's received.
uint32_t nx_other_ampdu_received_count
 MIB element to count number of unicast A-MPDUs received not destined to this device.
uint32_t dot11_mpdu_in_received_ampdu_count
 MIB element to count number of MPDUs received in an A-MPDU.
uint32_t dot11_received_octets_in_ampdu_count
 MIB element to count number of bytes received in an A-MPDU.
uint32_t dot11_ampdu_delimiter_crc_error_count
 MIB element to count number of CRC errors in MPDU delimeter of and A-MPDU.
uint32_t dot11_implicit_bar_failure_count
 MIB element to count number of implicit BAR frames that did not received BA frame successfully in response.
uint32_t dot11_explicit_bar_failure_count
 MIB element to count number of explicit BAR frames that did not received BA frame successfully in response.
uint32_t reserved_3 [5]
 Reserved.
uint32_t dot11_20mhz_frame_transmitted_count
 MIB element to count the number of frames transmitted at 20 MHz BW.
uint32_t dot11_40mhz_frame_transmitted_count
 MIB element to count the number of frames transmitted at 40 MHz BW.
uint32_t dot11_20mhz_frame_received_count
 MIB element to count the number of frames received at 20 MHz BW.
uint32_t dot11_40mhz_frame_received_count
 MIB element to count the number of frames received at 40 MHz BW.
uint32_t nx_failed_40mhz_txop
 MIB element to count the number of attempts made to acquire a 40 MHz TXOP.
uint32_t nx_successful_txops
 MIB element to count the number of successful TXOPs.
uint32_t reserved_4 [4]
 Reserved.
uint32_t dot11_dualcts_success_count
 MIB element to count the number of times the dual CTS fails.
uint32_t dot11_stbc_cts_success_count
 MIB element to count the number of times the AP does not detect a collision PIFS after transmitting a STBC CTS frame.
uint32_t dot11_stbc_cts_failure_count
 MIB element to count the number of times the AP detects a collision PIFS after transmitting a STBC CTS frame.
uint32_t dot11_non_stbc_cts_success_count
 MIB element to count the number of times the AP does not detect a collision PIFS after transmitting a non-STBC CTS frame.
uint32_t dot11_non_stbc_cts_failure_count
 MIB element to count the number of times the AP detects a collision PIFS after transmitting a non-STBC CTS frame.

Detailed Description

Simulated MIB structure.

Definition at line 36 of file hal_machw_mib.h.


The documentation for this struct was generated from the following file:

Generated on 14 Jan 2020 for Ceva-RW WLAN FullMAC SW documentation by  doxygen 1.6.1